• Summary

    This pair of straps іѕ specifically dеѕіgnеd tо work wіth the Strар Clаmр and will fit antennas of up to 10’ in diameter. The Strap Clamp includes standard webbing to fit antennas of up to 2.5’ diameter. Additional sizes to fit antennas up to 6’ in diameter or 12’ in diameter are also available. Strap Clamp sold separately.

    The Problem We Solve

    In a multi-technology environment, sites can have both panel antennas and microwave dishes in different shapes and/or sizes. This causes the Tower Technicians the need to carry several clamp accessories to properly complete antenna alignment under all scenarios.

    How We Solve It!

    With the 10’ Diameter Webbing Straps, the Tower Technician will be able to use the Strap Clamp for a variety of antennas of up to 10’ in diameter.
  • Summary

    This pair of straps іѕ specifically dеѕіgnеd tо work wіth the Strар Clаmр and will fit antennas of up to 12’ in diameter. The Strap Clamp includes standard webbing to fit antennas of up to 2.5’ diameter. Additional sizes to fit antennas up to 6’ in diameter or 10’ in diameter are also available. Strap Clamp sold separately.

    The Problem We Solve

    In a multi-technology environment, sites can have both panel antennas and microwave dishes in different shapes and/or sizes. This causes the Tower Technicians the need to carry several clamp accessories to properly complete antenna alignment under all scenarios.

    How We Solve It!

    With the 12’ Diameter Webbing Straps, the Tower Technician will be able to use the Strap Clamp for a variety of antennas of up to 12’ in diameter.
  • Summary

    Antenna WASP is a Wireless Antenna Sensor Pod that when attached to an antenna, hourly monitors its alignment in three dimensions: azimuth, tilt and roll. Antenna WASP will detect and report any undesired changes to all antennas being monitored (up to 18 antennas per site). The complete Antenna Alignment Monitoring Solution requires a Data Collector, sold separately. Optional accessory: 3Z Torque Wrench is the ideal tool to properly seal Antenna WASP and highly recommended. Sold separately.

    The Problem We Solve

    After identifying network performance issues or following a natural disaster, Wireless Operators are required to perform costly network audits to improve RAN KPI’s and validate site equipment assets. Currently, most of the site equipment assets can be remotely monitored with the standard Telecom Management Software Solutions except the antenna mechanical alignment, creating a challenge & increasing the OPEX to the Wireless Operators in these situations. Without the right information regarding the problem or its location, operation teams take longer to troubleshoot antenna problems at site and may be unable to fix it during the same visit.

    How We Solve It!

    Antenna WASP offers hourly antenna alignment monitoring on all wireless network antennas. Any changes in the antenna’s orientation (Azimuth, Tilt & Roll) is transmitted to the Data Collector wirelessly, the Data Collector then forwards this information to the Wireless Operator’s NOC via SNMP or displays the information via the Data Collector Manager Software. Wireless Operators define alignment thresholds and when these thresholds are exceeded, an alarm will be generated and the Operator will be notified immediately. Each antenna can be individually identified on a tower or throughout the entire network. This allows Wireless Operators to act quickly and restore communications to optimal performance by being able to send the correct team to the exact location with the right tools.
  • Out of stock
    The 3Z RF Aligner is the most compact GPS Antenna Alignment Tool in the industry. It incorporates GPS technology to calculate precise Azimuth, Tilt, Roll and AGL measurements for a multitude of directional antenna systems. Our universal antenna mounting system is used for quick antenna attachment and release. The 3Z RF Aligner is user friendly and easy to transport up any tower. Save all your antenna installation measurements for record keeping and reporting; easily accessible over USB.
  • Summary

    This pair of straps іѕ specifically dеѕіgnеd tо work wіth the Strар Clаmр and will fit antennas of up to 6’ in diameter. The Strap Clamp includes standard webbing to fit antennas of up to 2.5’ diameter. Additional sizes to fit antennas up to 10’ in diameter or 12’ in diameter are also available. Strap Clamp sold separately.

    The Problem We Solve

    In a multi-technology environment, sites can have both panel antennas and microwave dishes in different shapes and/or sizes. This causes the Tower Technicians the need to carry several clamp accessories to properly complete antenna alignment under all scenarios.

    How We Solve It!

    With the 6’ Diameter Webbing Straps, the Tower Technician will be able to use the Strap Clamp for a variety of antennas of up to 6’ in diameter.
  • Summary

    Wirelessly connect to your RF Vision or RF Aligner enabling your tool to measure precision antenna height (AGL). 3Z Pairing License included.

    The Problem We Solve

    The traditional tape drop method to measure antenna height is inaccurate, time-consuming, expensive and unverifiable.

    How We Solve It!

    Eliminate these challenges with the Bluetooth Laser Range Finder. Measure antenna height in seconds with an accuracy of +/- of 1mm. Validated height measurements will be sent via Bluetooth to your tool to update the associated antenna alignment report. For additional validation, the Bluetooth Laser Range Finder has a built-in camera that can capture images of the exact position where measurement was taken.  
  • Camera License Key

    USD $1,300.00

    Summary

    To experience the full capabilities of your RF Vision, it is required to purchase a lifetime Camera License Key. $300.00 Discount when purchased with a new RF Vision.

    The Problem We Solve

    The world around your antennas is constantly changing. New building constructions, growing tree lines, etc. will degrade your coverage objectives and create unhappy customers.

    How We Solve It!

    Never been done before! For the first time an antenna alignment tool not only aligns the antenna but it will show you where it is pointing. Only RF Vision will allow you to see these obstructions and give Radio Engineers the ability to optimize antenna orientations. A line-of-sight image that is mechanically aligned with the tool will be included on each antenna alignment report.
  • Summary

    To experience the full capabilities of your RF Vision, it is required to purchase a lifetime Camera License Key. $300.00 Discount when purchased with a new RF Vision.
    See More [+]

    The Problem We Solve

    The world around your antennas is constantly changing. New building constructions, growing tree lines, etc. will degrade your coverage objectives and create unhappy customers.

    How We Solve It!

    Never been done before! For the first time an antenna alignment tool not only aligns the antenna but it will show you where it is pointing. Only RF Vision will allow you to see these obstructions and give Radio Engineers the ability to optimize antenna orientations. A line-of-sight image that is mechanically aligned with the tool will be included on each antenna alignment report.
  • Summary

    The Ericsson AIR Mоunt wаѕ dеѕіgnеd tо bе a lіghtwеіght, precise and еаѕу tо uѕе mоuntіng solution fоr thе Ericsson AIR21 and AIR32 antennas.

    The Problem We Solve

    Due to the uniqueness of the Ericsson AIR21 and AIR32 antennas, standard clamps do not attach well. These antennas require a specialty clamp for proper alignment.

    How We Solve It!

    The Ericsson AIR Mоunt allows fоr ԛuісk іnѕtаllаtіоn оf the RF Vision and 3Z RF Alіgnеr onto thе AIR21 and AIR32 bу utіlіzіng ball bearings tо spin mоuntіng роѕtѕ оntо еxіѕtіng AIR bracket hаrdwаrе. Thе mоdulаr dеѕіgn оf thе AIR Mount еnаblеѕ thе 3Z RF Alіgnеr and RF Vision tо bе installed fоrwаrd, rеvеrѕе, +90 or -90 dеgrееѕ orientation.
  • Summary

    Designed for Field Technicians and RF Engineers, our Ground Verification System allows non-climbers to verify antenna alignment and height from ground level. (RF Vision and Bluetooth Laser Range Finder are sold separately.)

    The Problem We Solve

    For some Mobile Operators, the process of dispatching a tower crew can be very lengthy. When troubleshooting poor site preformance, it is important to quickly verify if antenna alignment is the root cause.

    How We Solve It!

    Prior to dispatching a tower crew, Field Technicians and RF Engineers can quickly determine if antenna alignment is the root cause of site performance degragation. Proper antenna alignment in conjunction with accurrate height is important to ensure optimal site perfomance. Our Ground Verification System allows you to verify both.
  • Lip Clamp

    USD $299.95

    Summary

    The Lip Clamp was designed to quickly mount the RF Vision or 3Z RF Aligner to a wide variety of microwave parabolic dishes in all sizes.

    The Problem We Solve

    Some small and odd shape microwave antennas do not work well with standard mounting clamps. These antennas require a specialty clamp for proper alignment.

    How We Solve It!

    The Lip Clamp is equipped with an adjustable clamping system that was specifically designed to mount onto small and odd shape microwave antennas . It is not only compact but also light weight and easy to use.
  • Summary

    The Nokia FASb Standoffs (4pcs.) were designed as an add-on for the Strap Clamp. This integrated mounting solution is precise and еаѕу tо uѕе with thе Nokia FASb antennas. Strap Clamp sold separately.

    The Problem We Solve

    Due to the uniqueness of the Nokia FASb antennas, standard clamps do not attach well. These antennas require a specialty clamp for proper alignment.

    How We Solve It!

    Using the Strap Clamp with the Nokia FASb Standoffs allows fоr ԛuісk іnѕtаllаtіоn оf the RF Vision and 3Z RF Alіgnеr onto thе Nokia FASb antennas.